The G-POWER program for the BMW M6 F13 touches all key components and lets the nifty BMW M6 appear even more sporty and beautiful and makes it, last but not least, a lot faster. In order to implement this target the G-POWER engineering department has transferred its experience from the area of supercharging to the turbocharged BMW 4.4l V8 engine. After all, the ASA supercharger used for the G-POWER supercharger systems is closely related to the turbochargers featured by BMW, since both units us a centrifugal compressor to build up boost.

The basis for the electronic output increase is the fact that G-POWER, in contrast to the manufacturer, does not use standard software full of compromises but an individual solution for the engine. Among others, the parameters for the amount of fuel and the ignition timing are modified depending on the increased boost level.  

SEE ALSO:  BMW 7 Series produced in 2 million units in Dingolfing plant

Based on the competence and knowledge coming from the up to 800 hp strong BMW M5 HURRICANE versions, G-POWER has managed to limit the torque figures during the shifting process and so reduces the stress for the transmission. This effort shows the difference in quality of the G-POWER electronic power output increase when compared to the competition. Just pushing the output fingers is something many can do; G-POWER is providing a well balanced, high-quality package for the power output increase of the BMW M6. 

But not just the ECU management has been modified by G-POWER in order to achieve a power output of 710 hp, the exhaust system has been substantially reworked as well to provide for an output optimized back pressure. The modification of the exhaust system cover catalysts replacement pipes (downpipes) and a G-POWER Titanium exhaust system, incl. Titanium link pipes with resonators starting from the down pipe. In addition to the power output increase the G-POWER Titanium exhaust system gives the BMW M6 a deep, throaty sound that turns heads but is at now time annoying and at the same time saves approx. 12 kg compared to the stock exhaust system. The G-POWER exhaust system is available with four Titanium or Carbon Tailpipes with a diameter of 100 mm each.

SEE ALSO:  2024 BMW X1 M35i xDrive has 317 HP

In result the G-POWER Bi-Tronik III V2 pushes the BMW M6’s standard output of 560 hp / 680 Nm to an awesome 710 hp and 890 Nm of torque. Naturally the performance figures benefit from this output increase, as well. The figure from stand still to 200 km/h is now just 10,8 seconds and the top speed is more than 300 km/h.

Concerning the suspension at first one will notice the 21 inch G-POWER HURRICANE forged wheels, wrapped with tyres from the G-POWER’s technology partner MICHELIN in the dimensions 265/30 ZR 21 and 305/25 ZR 21. The double spokes, typical for the G-POWER design, highlight the elegant design of the new BMW M6. Further improvement of the road handling is realized through the continuously height-adjustable G-POWER coil-over suspension GM6-RS with nine selectable settings each for bound and rebound.

SEE ALSO:  BMW X5 Protection VR6 is here

The cost for the 21 inch G-POWER HURRICANE complete wheel set incl. MICHELIN Pilot Sport tyres in the dimension 265/30 ZR 21 and 305/25 ZR 21 is 8.325,00 €, the G-POWER coil-over suspension GM6-RS is 2.179,83,00 €, the G-POWER Ceramic braking system for the front axle is 14.460,50 Euro. The output increase with the help of the G-POWER BI-TRONIK III V2 including a G-POWER Titanium exhaust system is 17.895,00 € including the individual adjustment of to the specific customer car.